News
BIG Update 4-18-24
Alot of happenings here at Known Motors! Shop truck almost done, Parting out an RX7, Rebuilding RX8 engines, New Shop tools!
BIG Update 4-18-24
Alot of happenings here at Known Motors! Shop truck almost done, Parting out an RX7, Rebuilding RX8 engines, New Shop tools!
RX2200 MAXXEXU Wiring! 7/1/2023
So begins the fun time of wiring! I bought a MAXXECU with a Flying Lead Harness crafted by MACHINE WERKS in Santa Barbara CA to start the process. They also hooked...
RX2200 MAXXEXU Wiring! 7/1/2023
So begins the fun time of wiring! I bought a MAXXECU with a Flying Lead Harness crafted by MACHINE WERKS in Santa Barbara CA to start the process. They also hooked...
RX2200 Engine is built! 1/20/23
Over the last several weeks I have been cleaning smd prepping this 13b for a rebuild. I had to get one new rotor and I lapped the rough irons to...
RX2200 Engine is built! 1/20/23
Over the last several weeks I have been cleaning smd prepping this 13b for a rebuild. I had to get one new rotor and I lapped the rough irons to...
Project RX2200 10/1/22
Its a slower process to do it just right. I decided to go with an original look for the truck, like if Mazda built an REPU in 1990 this would...
Project RX2200 10/1/22
Its a slower process to do it just right. I decided to go with an original look for the truck, like if Mazda built an REPU in 1990 this would...
My little blue $500 Pickup truck
Bought this 1989 B2200 pickup truck on Christmas day in 2020. Then drove it 600miles home to Minnesota. I put 10,000 miles on the truck in 1.5yr and the 4cyl...
My little blue $500 Pickup truck
Bought this 1989 B2200 pickup truck on Christmas day in 2020. Then drove it 600miles home to Minnesota. I put 10,000 miles on the truck in 1.5yr and the 4cyl...
Class winner at The Ol'Marais River Run in 2021
My rotary swapped 1972 MGB GT took 1st place in the 25 years and under class!
Class winner at The Ol'Marais River Run in 2021
My rotary swapped 1972 MGB GT took 1st place in the 25 years and under class!